View 74LV13209_4680179.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1. general description the 74lv132 is a low-voltage si-gate cmos device that is pin and function compatible with 74hc132 and 74hct132. the 74lv132 contains four 2-input nand gates which accept standard input signals. they are capable of transforming slowly changing input signals into sharply de?ned, jitter-free output signals. the gate switches at different points for positive and negative-going signals. the difference between the positive voltage v t+ and the negative voltage v t - is de?ned as the input hysteresis voltage v h . 2. features n wide operating voltage: 1.0 v to 5.5 v n optimized for low voltage applications: 1.0 v to 3.6 v n accepts ttl input levels between v cc = 2.7 v and v cc = 3.6 v n typical output ground bounce < 0.8 v at v cc = 3.3 v and t amb = 25 c n typical high-level output voltage (v oh ) undershoot: > 2 v at v cc = 3.3 v and t amb =25 c n esd protection: u hbm jesd22-a114e exceeds 2000 v u mm jesd22-a115-a exceeds 200 v n multiple package options n speci?ed from - 40 cto+85 c and from - 40 c to +125 c 3. applications n wave and pulse shapers for highly noisy environments n astable multivibrators n monostable multivibrators 74lv132 quad 2-input nand schmitt trigger rev. 05 2 july 2009 product data sheet
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 2 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger 4. ordering information 5. functional diagram table 1. ordering information type number package temperature range name description version 74lv132n - 40 c to +125 c dip14 plastic dual in-line package; 14 leads (300 mil) sot27-1 74lv132d - 40 c to +125 c so14 plastic small outline package; 14 leads; body width 3.9 mm sot108-1 74lv132db - 40 c to +125 c ssop14 plastic shrink small outline package; 14 leads; body width 5.3 mm sot337-1 74lv132pw - 40 c to +125 c tssop14 plastic thin shrink small outline package; 14 leads; body width 4.4 mm sot402-1 74lv132bq - 40 c to +125 c dhvqfn14 plastic dual in-line compatible thermal enhanced very thin quad ?at package; no leads; 14 terminals; body 2.5 3 0.85 mm sot762-1 fig 1. logic symbol fig 2. iec logic symbol fig 3. logic diagram (one gate) mna407 1a 1y 1 3 1b 2 2a 2y 4 6 2b 5 3a 3y 9 8 3b 10 4a 4y 12 11 4b 13 2 3 & 1 5 6 & 4 10 8 & 9 mna408 13 11 & 12 mna409 a y b
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 3 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger 6. pinning information 6.1 pinning 6.2 pin description (1) the die substrate is attached to the exposed die pad using conductive die attach material. it cannot be used as a supply pin or input. fig 4. pin con?guration dip14, so14 and (t)ssop14 fig 5. pin con?guration dhvqfn14 132 1a v cc 1b 4b 1y 4a 2a 4y 2b 3b 2y 3a gnd 3y 001aac203 1 2 3 4 5 6 7 8 10 9 12 11 14 13 001aah099 74lv132 transparent top view v cc (1) 2y 3a 2b 3b 2a 4y 1y 4a 1b 4b gnd 3y 1a v cc 6 9 5 10 4 11 3 12 2 13 7 8 1 14 terminal 1 index area table 2. pin description symbol pin description 1a 1 data input 1b 2 data input 1y 3 data output 2a 4 data input 2b 5 data input 2y 6 data output gnd 7 ground (0 v) 3y 8 data output 3a 9 data input 3b 10 data input 4y 11 data output 4a 12 data input 4b 13 data input v cc 14 supply voltage
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 4 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger 7. functional description 8. limiting values [1] the input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] p tot derates linearly with 12 mw/k above 70 c. [3] p tot derates linearly with 8 mw/k above 70 c. [4] p tot derates linearly with 5.5 mw/k above 60 c. [5] p tot derates linearly with 4.5 mw/k above 60 c. table 3. function table h = high voltage level; l = low voltage level. input output na nb ny llh lhh hl h hhl table 4. limiting values in accordance with the absolute maximum rating system (iec 60134). voltages are referenced to gnd (ground = 0 v). symbol parameter conditions min max unit v cc supply voltage - 0.5 +7.0 v i ik input clamping current v i < - 0.5 v or v i >v cc + 0.5 v [1] - 20 ma i ok output clamping current v o < - 0.5 v or v o >v cc + 0.5 v [1] - 50 ma i o output current v o = - 0.5 v to (v cc + 0.5 v) - 25 ma i cc supply current - 50 ma i gnd ground current - 50 - ma t stg storage temperature - 65 +150 c p tot total power dissipation t amb = - 40 c to +125 c dip14 package [2] - 750 mw so14 package [3] - 500 mw (t)ssop14 package [4] - 500 mw dhvqfn14 package [5] - 500 mw
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 5 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger 9. recommended operating conditions [1] the static characteristics are guaranteed from v cc = 1.2 v to v cc = 5.5 v, but lv devices are guaranteed to function down to v cc = 1.0 v (with input levels gnd or v cc ). 10. static characteristics [1] typical values are measured at t amb = 25 c. table 5. recommended operating conditions voltages are referenced to gnd (ground = 0 v). symbol parameter conditions min typ max unit v cc supply voltage [1] 1.0 3.3 5.5 v v i input voltage 0 - v cc v v o output voltage 0 - v cc v t amb ambient temperature - 40 +25 +125 c table 6. static characteristics voltages are referenced to gnd (ground = 0 v). symbol parameter conditions - 40 c to +85 c - 40 c to +125 c unit min typ [1] max min max v oh high-level output voltage v i = v t+ or v t - l o = - 100 m a; v cc = 1.2 v - 1.2 - - - v l o = - 100 m a; v cc = 2.0 v 1.8 2.0 - 1.8 - v l o = - 100 m a; v cc = 2.7 v 2.5 2.7 - 2.5 - v l o = - 100 m a; v cc = 3.0 v 2.8 3.0 - 2.8 - v l o = - 100 m a; v cc = 4.5 v 4.3 4.5 - 4.3 - v l o = - 6 ma; v cc = 3.0 v 2.4 2.82 - 2.2 - v l o = - 12 ma; v cc = 4.5 v 3.6 4.2 - 3.5 - v v ol low-level output voltage v i = v t+ or v t - i o = 100 m a; v cc = 1.2 v - 0 - - - v i o = 100 m a; v cc = 2.0 v - 0 0.2 - 0.2 v i o = 100 m a; v cc = 2.7 v - 0 0.2 - 0.2 v i o = 100 m a; v cc = 3.0 v - 0 0.2 - 0.2 v i o = 100 m a; v cc = 4.5 v - 0 0.2 - 0.2 v i o = 6 ma; v cc = 3.0 v - 0.25 0.40 - 0.50 v i o = 12 ma; v cc = 4.5 v - 0.35 0.55 - 0.65 v i i input leakage current v i =v cc or gnd; v cc = 5.5 v - - 1.0 - 1.0 m a i cc supply current v i = v cc or gnd; i o = 0 a; v cc = 5.5 v - - 20.0 - 40 m a d i cc additional supply current per input; v i = v cc - 0.6 v; v cc = 2.7 v to 3.6 v - - 500 - 850 m a c i input capacitance - 3.5 - - - pf
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 6 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger 11. dynamic characteristics [1] all typical values are measured at t amb =25 c. [2] t pd is the same as t plh and t phl . [3] typical values are measured at nominal supply voltage (v cc = 3.3 v and v cc = 5.0 v). [4] c pd is used to determine the dynamic power dissipation (p d in m w). p d =c pd v cc 2 f i n+ s (c l v cc 2 f o ) where: f i = input frequency in mhz, f o = output frequency in mhz c l = output load capacitance in pf v cc = supply voltage in v n = number of inputs switching s (c l v cc 2 f o ) = sum of the outputs. 12. waveforms table 7. dynamic characteristics gnd = 0 v; for test circuit see figure 7 . symbol parameter conditions - 40 c to +85 c - 40 c to +125 c unit min typ [1] max min max t pd propagation delay na, nb to ny; see figure 6 [2] v cc = 1.2 v - 65 - - - ns v cc = 2.0 v - 18 34 - 43 ns v cc = 2.7 v - 15 24 - 30 ns v cc = 3.0 v to 3.6 v; c l =15pf [3] -10- - -ns v cc = 3.0 v to 3.6 v [3] - 12 20 - 25 ns v cc = 4.5 v to 5.5 v [3] - 9.0 14 - 17 ns c pd power dissipation capacitance c l = 50 pf; f i = 1 mhz; v i = gnd to v cc [4] -24- - -pf measurement points are given in t ab le 8 . v ol and v oh are typical voltage output levels that occur with the output load. fig 6. the input (na, nb) to output (ny) propagation delays 001aaa662 t phl t plh v m v m na, nb input ny output gnd v i v oh v ol
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 7 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger 13. transfer characteristics table 8. measurement points supply voltage input output v cc v m v m < 2.7 v 0.5v cc 0.5v cc 2.7 v to 3.6 v 1.5 v 1.5 v 3 4.5 v 0.5v cc 0.5v cc test data is given in t ab le 9 . de?nitions test circuit: r t = termination resistance should be equal to output impedance z o of the pulse generator. r l = load resistance. c l = load capacitance including jig and probe capacitance. fig 7. load circuit for switching times v cc v i v o 001aaa663 dut c l 50 pf r t r l 1 k w pulse generator table 9. test data supply voltage v cc input v i t r , t f < 2.7 v v cc 2.5 ns 2.7 v to 3.6 v 2.7 v 2.5 ns 3 4.5 v v cc 2.5 ns table 10. transfer characteristics gnd = 0 v; for test circuit see figure 7 . symbol parameter conditions - 40 c to +85 c - 40 c to +125 c unit min typ [1] max min max v t+ positive-going threshold voltage see figure 6 v cc = 1.2 v - 0.70 - - - v v cc = 2.0 v 0.8 1.10 1.4 0.8 1.4 v v cc = 2.7 v 1.0 1.45 2.0 1.0 2.0 v v cc = 3.0 v 1.2 1.60 2.2 1.2 2.2 v v cc = 3.6 v 1.5 1.95 2.4 1.5 2.4 v v cc = 4.5 v 1.7 2.50 3.2 1.7 3.2 v v cc = 5.5 v 2.1 3.00 3.9 2.1 3.9 v
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 8 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger [1] all typical values are measured at t amb =25 c. 14. waveforms transfer characteristics v t - negative-going threshold voltage see figure 6 v cc = 1.2 v - 0.34 - - - v v cc = 2.0 v 0.3 0.65 0.9 0.3 0.9 v v cc = 2.7 v 0.4 0.90 1.4 0.4 1.4 v v cc = 3.0 v 0.6 1.05 1.5 0.6 1.5 v v cc = 3.6 v 0.8 1.30 1.8 0.8 1.8 v v cc = 4.5 v 0.9 1.60 2.0 0.9 2.0 v v cc = 5.5 v 1.2 2.00 2.6 1.2 2.6 v v h hysteresis voltage (v t+ - v t - ); see figure 6 v cc = 1.2 v - 0.3 - - - v v cc = 2.0 v 0.2 0.55 0.8 0.2 0.8 v v cc = 2.7 v 0.3 0.60 1.1 0.3 1.1 v v cc = 3.0 v 0.4 0.65 1.2 0.4 1.2 v v cc = 3.6 v 0.4 0.70 1.2 0.4 1.2 v v cc = 4.5 v 0.4 0.80 1.4 0.4 1.4 v v cc = 5.5 v 0.6 1.00 1.5 0.6 1.5 v table 10. transfer characteristics continued gnd = 0 v; for test circuit see figure 7 . symbol parameter conditions - 40 c to +85 c - 40 c to +125 c unit min typ [1] max min max v t+ and v t - limits at 70 % and 20 %. fig 8. transfer characteristic fig 9. de?nition of v t+ , v t - and v h mna207 v o v i v h v t+ v t - mna208 v o v i v h v t+ v t -
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 9 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger v cc = 1.2 v. v cc = 2.0 v. fig 10. typical 74lv132 transfer characteristics fig 11. typical 74lv132 transfer characteristics v i (v) 0 1.2 0.9 0.3 0.6 001aaa659 4 8 12 i cc ( m a) 0 v i (v) 02 1.6 0.8 1.2 0.4 001aaa660 40 60 20 80 100 i cc ( m a) 0 v cc = 3.0 v. fig 12. typical 74lv132 transfer characteristics v i (v) 03 2.4 1.2 1.8 0.6 001aaa661 100 200 300 i cc ( m a) 0
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 10 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger 15. package outline fig 13. package outline sot27-1 (dip14) unit a max. 1 2 (1) (1) b 1 cd (1) z ee m h l references outline version european projection issue date iec jedec jeita mm inches dimensions (inch dimensions are derived from the original mm dimensions) sot27-1 99-12-27 03-02-13 a min. a max. b max. w m e e 1 1.73 1.13 0.53 0.38 0.36 0.23 19.50 18.55 6.48 6.20 3.60 3.05 0.254 2.54 7.62 8.25 7.80 10.0 8.3 2.2 4.2 0.51 3.2 0.068 0.044 0.021 0.015 0.77 0.73 0.014 0.009 0.26 0.24 0.14 0.12 0.01 0.1 0.3 0.32 0.31 0.39 0.33 0.087 0.17 0.02 0.13 050g04 mo-001 sc-501-14 m h c (e ) 1 m e a l seating plane a 1 w m b 1 e d a 2 z 14 1 8 7 b e pin 1 index 0 5 10 mm scale note 1. plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included. dip14: plastic dual in-line package; 14 leads (300 mil) sot27-1
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 11 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger fig 14. package outline sot108-1 (so14) unit a max. a 1 a 2 a 3 b p cd (1) e (1) (1) eh e ll p qz y w v q references outline version european projection issue date iec jedec jeita mm inches 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 8.75 8.55 4.0 3.8 1.27 6.2 5.8 0.7 0.6 0.7 0.3 8 0 o o 0.25 0.1 dimensions (inch dimensions are derived from the original mm dimensions) note 1. plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.0 0.4 sot108-1 x w m q a a 1 a 2 b p d h e l p q detail x e z e c l v m a (a ) 3 a 7 8 1 14 y 076e06 ms-012 pin 1 index 0.069 0.010 0.004 0.057 0.049 0.01 0.019 0.014 0.0100 0.0075 0.35 0.34 0.16 0.15 0.05 1.05 0.041 0.244 0.228 0.028 0.024 0.028 0.012 0.01 0.25 0.01 0.004 0.039 0.016 99-12-27 03-02-19 0 2.5 5 mm scale so14: plastic small outline package; 14 leads; body width 3.9 mm sot108-1
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 12 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger fig 15. package outline sot337-1 (ssop14) unit a 1 a 2 a 3 b p cd (1) e (1) eh e ll p qz y w v q references outline version european projection issue date iec jedec jeita mm 0.21 0.05 1.80 1.65 0.25 0.38 0.25 0.20 0.09 6.4 6.0 5.4 5.2 0.65 1.25 0.2 7.9 7.6 1.03 0.63 0.9 0.7 1.4 0.9 8 0 o o 0.13 0.1 dimensions (mm are the original dimensions) note 1. plastic or metal protrusions of 0.25 mm maximum per side are not included. sot337-1 99-12-27 03-02-19 (1) w m b p d h e e z e c v m a x a y 1 7 14 8 q a a 1 a 2 l p q detail x l (a ) 3 mo-150 pin 1 index 0 2.5 5 mm scale ssop14: plastic shrink small outline package; 14 leads; body width 5.3 mm sot337-1 a max. 2
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 13 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger fig 16. package outline sot402-1 (tssop14) unit a 1 a 2 a 3 b p cd (1) e (2) (1) eh e ll p qz y w v q references outline version european projection issue date iec jedec jeita mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.72 0.38 8 0 o o 0.13 0.1 0.2 1 dimensions (mm are the original dimensions) notes 1. plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 sot402-1 mo-153 99-12-27 03-02-18 w m b p d z e 0.25 17 14 8 q a a 1 a 2 l p q detail x l (a ) 3 h e e c v m a x a y 0 2.5 5 mm scale tssop14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm sot402-1 a max. 1.1 pin 1 index
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 14 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger fig 17. package outline sot762-1 (dhvqfn14) terminal 1 index area 0.5 1 a 1 e h b unit y e 0.2 c references outline version european projection issue date iec jedec jeita mm 3.1 2.9 d h 1.65 1.35 y 1 2.6 2.4 1.15 0.85 e 1 2 0.30 0.18 0.05 0.00 0.05 0.1 dimensions (mm are the original dimensions) sot762-1 mo-241 - - - - - - 0.5 0.3 l 0.1 v 0.05 w 0 2.5 5 mm scale sot762-1 dhvqfn14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 14 terminals; body 2.5 x 3 x 0.85 mm a (1) max. a a 1 c detail x y y 1 c e l e h d h e e 1 b 26 13 9 8 7 1 14 x d e c b a 02-10-17 03-01-27 terminal 1 index area a c c b v m w m e (1) note 1. plastic or metal protrusions of 0.075 mm maximum per side are not included. d (1)
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 15 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger 16. abbreviations 17. revision history table 11. abbreviations acronym description cmos complementary metal oxide semiconductor dut device under test esd electrostatic discharge hbm human body model mm machine model ttl transistor-transistor logic table 12. revision history document id release date data sheet status change notice supersedes 74lv132_5 20090702 product data sheet - 74lv132_4 modi?cations: ? t ab le 6 : the conditions for high-level output voltage and low-level output voltage have been changed. 74lv132_4 20071112 product data sheet - 74lv132_3 74lv132_3 20040415 product speci?cation - 74lv132_2 74lv132_2 19980428 product speci?cation - 74lv132_1 74lv132_1 19970204 product speci?cation - -
74lv132_5 ? nxp b.v. 2009. all rights reserved. product data sheet rev. 05 2 july 2009 16 of 17 nxp semiconductors 74lv132 quad 2-input nand schmitt trigger 18. legal information 18.1 data sheet status [1] please consult the most recently issued document before initiating or completing a design. [2] the term short data sheet is explained in section de?nitions. [3] the product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple dev ices. the latest product status information is available on the internet at url http://www .nxp .com . 18.2 de?nitions draft the document is a draft version only. the content is still under internal review and subject to formal approval, which may result in modi?cations or additions. nxp semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. short data sheet a short data sheet is an extract from a full data sheet with the same product type number(s) and title. a short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. for detailed and full information see the relevant full data sheet, which is available on request via the local nxp semiconductors sales of?ce. in case of any inconsistency or con?ict with the short data sheet, the full data sheet shall prevail. 18.3 disclaimers general information in this document is believed to be accurate and reliable. however, nxp semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. right to make changes nxp semiconductors reserves the right to make changes to information published in this document, including without limitation speci?cations and product descriptions, at any time and without notice. this document supersedes and replaces all information supplied prior to the publication hereof. suitability for use nxp semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an nxp semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. nxp semiconductors accepts no liability for inclusion and/or use of nxp semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customers own risk. applications applications that are described herein for any of these products are for illustrative purposes only. nxp semiconductors makes no representation or warranty that such applications will be suitable for the speci?ed use without further testing or modi?cation. limiting values stress above one or more limiting values (as de?ned in the absolute maximum ratings system of iec 60134) may cause permanent damage to the device. limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the characteristics sections of this document is not implied. exposure to limiting values for extended periods may affect device reliability. terms and conditions of sale nxp semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www .nxp .com/pro? le/ter ms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by nxp semiconductors. in case of any inconsistency or con?ict between information in this document and such terms and conditions, the latter will prevail. no offer to sell or license nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. export control this document as well as the item(s) described herein may be subject to export control regulations. export might require a prior authorization from national authorities. 18.4 trademarks notice: all referenced brands, product names, service names and trademarks are the property of their respective owners. 19. contact information for more information, please visit: http://www .nxp.com for sales of?ce addresses, please send an email to: salesad dresses@nxp.com document status [1] [2] product status [3] de?nition objective [short] data sheet development this document contains data from the objective speci?cation for product development. preliminary [short] data sheet quali?cation this document contains data from the preliminary speci?cation. product [short] data sheet production this document contains the product speci?cation.
nxp semiconductors 74lv132 quad 2-input nand schmitt trigger ? nxp b.v. 2009. all rights reserved. for more information, please visit: http://www.nxp.com for sales office addresses, please send an email to: salesaddresses@nxp.com date of release: 2 july 2009 document identifier: 74lv132_5 please be aware that important notices concerning this document and the product(s) described herein, have been included in section legal information. 20. contents 1 general description . . . . . . . . . . . . . . . . . . . . . . 1 2 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3 applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 4 ordering information . . . . . . . . . . . . . . . . . . . . . 2 5 functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 6 pinning information . . . . . . . . . . . . . . . . . . . . . . 3 6.1 pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 6.2 pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3 7 functional description . . . . . . . . . . . . . . . . . . . 4 8 limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4 9 recommended operating conditions. . . . . . . . 5 10 static characteristics. . . . . . . . . . . . . . . . . . . . . 5 11 dynamic characteristics . . . . . . . . . . . . . . . . . . 6 12 waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 13 transfer characteristics. . . . . . . . . . . . . . . . . . . 7 14 waveforms transfer characteristics . . . . . . . . . 8 15 package outline . . . . . . . . . . . . . . . . . . . . . . . . 10 16 abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 15 17 revision history . . . . . . . . . . . . . . . . . . . . . . . . 15 18 legal information. . . . . . . . . . . . . . . . . . . . . . . 16 18.1 data sheet status . . . . . . . . . . . . . . . . . . . . . . 16 18.2 de?nitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 18.3 disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 18.4 trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 19 contact information. . . . . . . . . . . . . . . . . . . . . 16 20 contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

▲Up To Search▲

Price & Availability of 74LV13209

	To Download 74LV13209 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .